Excellent quality Remote Control Kit - Large Panel Design Wireless WIFI Smart Switch – Yourlite

YOURLITE WIFI Smart Switch Smart-WSG02 is a new design. It has the unique advantages of easily being installed, self-generated power, durability, safety and so on.

Our WIFI Smart Switch Smart-WSG02 has many practical advantages for you:

1.The installation is quick and convenient, which reduces the noise and dust pollution during installation. The step-by-step instructions will guide you through the wiring process in a short time. Note: This WIFI smart switch must be connected to the line wire of one end, and the other end can only be connected to a traditional switch. The neutral wire is required, standard wall plate size. The smart switch is only applicable to 2. 4G WiFi ( NOT 5G).

2.The WIFI smart switch does not need to be equipped with batteries, and has a built-in micro-energy kinetic energy acquisition module, with a service life of 5-10 years.

3.The WIFI smart switch installation does not need to be wired to the switch, and it is controlled by 433Mhz RF, which saves a lot of time and material cost for cutting the wall and pipe.

4.No need to install on the wall.

5.IPX5, can resist a sustained, low-pressure water jet spray.

6.The WIFI smart switch can match any combination within 20, adding switches and so on, and it doesn’t need to rectify the circuit. It can be used after paring, bringing a lot of fun and convenience to life.

YOURLITE Smart switches Smart-WSG02 is an easy-install product for your smart home solution, and well-supported by the mainstream voice control system. If you are building a smart home, it may be the must-have smart switch.